- This welder comes with 3 years Warranty.
- The HYMIG-180 is a lightweight and incredibly versatile single phase MIG / MMA welder from Hyundai. The HYMIG-180 is capable of welding mild steel up to 6 mm.The HYMIG-180 is easy to carry around thanks to its adjustable harness and lightweight pressed steel case with powder coated finish for extra corrosion resistance. Accessories include electrode holder with 2m cable, earth clamp with 1.5m cable, chipping hammer and wire brush making the HYMIG-180 extremely cost effective.The HYMIG-180 MIG welder features a stepless regulator for infinite variable control of the welding current with a low current facility for effective welding of thinner materials. The welding (output) current of the HYMIG-180 can be regulated within the range of 10-180 Ampere making the HYMIG-180 adjustable to suit welding different materials and thicknesses of steel.Beware of lower quality models by always checking the ‘Duty Cycle’. Duty cycle is the amount of time, within a 10 minute period the welder can be used, on a given output. For example, our 180A welder has a duty cycle of 35% when used on 180A output (MIG), and 35% when used on 140A output (MMA/ARC). This means it can be used for three and a half minutes in every 10 minute period.
Gross Weight (kg) 22.00 Model HYMIG-180 Input Voltage (V) 230.00 AC Frequency 50.00 Efficiency (%) 80.00 Power Factor (Cos?) 0.70 No-Load Voltage (V) 60.00 Rated Output Range (Amps) 10 – 180 Duty Cycle (%) Under 40ºC 35% @ 180A (MIG), 60% @ 140A (MIG), 100% @ 105A (MIG), 35% @ 140A (MMA) Current @ 60% (A) 125 (MIG) 120 (MMA) Usable Electrode (mm) 0.8-10 (MIG), 1.0-4.0 (MMA) Dimensions (H x W x L) (mm) 540 X 320 X 405 Net Weight (kg) 22.00